Create the downstream flow path from the storm drain

The key locations in the analysis are a school, a drainage ditch, and a storm drain.

Open a map

You'll open a map and identify landmarks.

  1. Sign in to your ArcGIS organizational account.
    Note:

    If you don't have an organizational account, see options for software access.

  2. Open the map Storm Drain Analysis.

    Map Viewer opens.

    ArcGIS Online’s user interface, with the start map showing imagery of Murfreesboro, Tennessee

    Note:

    Depending on your organizational and user settings, you may have opened Map Viewer Classic. ArcGIS Online offers two map viewers for viewing, using, and creating maps. For more information on the map viewers available and which to use, please see this FAQ.

    This tutorial uses Map Viewer.

  3. If necessary, on the ribbon, click Open in Map Viewer.

Locate the school, drainage ditch, and storm drain

You'll use zoom and pan tools to locate features on the map.

  1. If necessary, close any messages or panes on the Settings (light) toolbar.
  2. Look at the map.

    The elementary school is the large building just northeast of the yellow marker.

    Location of Blackman Elementary School

  3. Use Zoom and Pan to show the elementary school on your map.

    Due south of the school building is a long row of trees and bushes. They grow along a drainage ditch, which is part of a storm sewer system designed to carry storm water to rivers and ponds and other water bodies to prevent flooding of roads, homes, and school yards.

  4. Zoom in to where the row of trees and bushes intersects with Fortress Blvd.

    There's a square yellow symbol there on the map.

    The yellow symbol indicates where there are two storm drains that collect storm water from the road that flows into the drainage ditch. If you want to see what the drains look like, there's a pair just like them on the other side of the road.

    Location of storm sewer for analysis and similar features on the other side of the road

    The two storm drains marked by the yellow square are the ones you'll be asking questions about. First, you'll ask, Where does the water that goes into the storm drain go? What route does it take to its destination? Before you start your analysis, you'll save your own copy of the map.

Save the map

You'll save your map to your ArcGIS Online account.

  1. On the lower right of the map, click the Default map view button.

    The Default map view button

    The map returns to the original view of Murfreesboro.

  2. On the Contents (dark) toolbar, click the Save and Open button and choose Save as.

    Save button and Save as button

  3. In the Save map window, accept the existing information and click Save.

    Save map pane filled

    You've saved a copy of the map to your account. Next, you'll start your analysis.

Find the downstream flow path from the storm drain

You identified the location of a storm drain near Blackman Elementary School and saved a copy of your map. Next, you'll create a trace, or flow path, showing where the water goes from that storm drain.

You'll use the Trace Downstream tool to find the downstream flow path. This tool uses a Digital Elevation Model, or DEM, to create the flow path. A DEM is a 3D map of the earth's surface. It includes the location of hills and valleys and can help predict where water will flow. Unfortunately, it's not a dataset that you can look at, but it plays a key role in the analysis.

  1. On the Settings (light) toolbar, click the Analysis button. In the Analysis pane, click the Tools tab.

    The Analysis button opens the analysis pane with three tabs: Home, Tools and History

  2. On the Tools tab, expand Find locations and choose Trace Downstream.

    Find locations and Trace Downstream

  3. In the Trace Downstream pane, for Input point features, click + Layer and choose Storm drain.

    Select Storm drain layer.

    The Storm drain layer includes just one point indicating the location of the storm drain near the elementary school.

  4. If necessary, scroll down in the Trace Downstream pane so you can see Result layer. For Output line name, type Storm drain trace and add your name or initials.
    Note:

    You cannot create two layers in an ArcGIS organization with the same name. Adding your initials to a layer name ensures that other people in your organization can also complete this tutorial. Once a layer has been created, you can rename it in the map to remove your initials, which will not affect the name of the underlying data layer.

    Set Output line name to Storm drain trace.

  5. Click Run.

    Run button

    When the analysis is complete, the trace line is added to the map and appears in the Layers pane.

    Storm drain trace on the map

    The storm water travels down the drainage ditch and into Puckett Creek, which flows north around the elementary school. Where does it go from there?

  6. In the Layers pane, point to the Storm drain trace - TraceFeatures layer, click the Options button, and choose Zoom to.

    Zoom to Storm drain trace - TraceFeatures

    The map zooms out to show the entire trace.

    Full downstream trace from Murfreesboro to the Gulf of Mexico

    From Puckett Creek, the flow path connects to the Cumberland River. The path meanders west through Nashville and then flows north to connect with the Ohio River. Once it connects to the Mississippi River, the path flows to New Orleans and enters the Gulf of Mexico at the mouth of the Mississippi. In all, it touches the border of, or passes through seven states, two major rivers, two large lakes, and a number of smaller lakes and rivers. The route is more than 1,200 miles.

  7. Click the Default map view button and click Save.

    You have identified the path storm water takes from Murfreesboro to the Gulf of Mexico. Next, you'll ask a different question: Where does the water come from that falls into the storm drain near Blackman Elementary School?


Create a watershed that feeds the storm drain

You created a trace to see where the water from the storm drain flows. Next, you'll use the Create Watersheds tool to identify the upstream contributing areas for the storm drain.

Create a watershed

You'll create a watershed for the region near Blackman Elementary School. First, you'll prepare the map.

  1. If necessary, open the Storm Drain Analysis map that you saved.
  2. If necessary, open the Layers pane. In the Layers pane, point to the Storm drain trace – TraceFeatures layer and click the Visibility button to turn the layer off.

    Turn off Storm drain trace layer.

  3. In the Trace Downstream pane, click the Back button to return to the Tools tab.

    Trace Downstream pane’s Back button

  4. On the Tools tab, expand Find locations and choose Create Watersheds.

    Find locations and Create Watersheds

    The Create watersheds pane appears. The Create Watersheds tool, like the Trace Downstream tool, uses a DEM. The Create watersheds tool identifies the area that drains to a specific location. You'll set a search distance in miles, 0.5 miles, to tell the model how far to look for possible inputs.

  5. In the Create watersheds pane, fill in these values:

    • For Input point features, click + Layer and choose Storm drain (Points).
    • For Search distance, type 0.5. For Distance units, choose Miles.
    • For Output polygon name, type Upstream Watershed and add your name or initials.

  6. Click Run.

    When the analysis is complete, the watershed area is added to the map and appears in the Layers pane.

    Watershed added to map

    It's difficult to see the yellow marker locating the storm drain. You'll move the storm drain layer on top of the watershed layer.

  7. In the Layers pane, drag the Storm drain layer to the top of the layer list.

    Drag Storm drain layer to the top of the Layers list

    Next, you'll have a look at the extent of the watershed that flows into the storm drain.

  8. In the Layers pane, point to the Upstream watershed layer and click the Expand button.

    Expand watershed layer

  9. In the Layers pane, point to the WatershedFeatures layer, click the Options button, and choose Zoom to.

    Zoom to watershed extent

    The map zooms to the extent of the watershed.

    Full watershed extent on map

  10. Click the watershed on the map.

    The pop-up appears.

  11. Review the pop-up information.

    Watershed pop-up on map

    The watershed contributing storm water to the storm drain near Blackman Elementary School covers more than 21 square miles (55 kilometers).

    Note:

    The underlying data used in this tutorial is updated periodically so the values may vary from the example image.

  12. In the pop-up window, click the Close button.

    Close button on pop-up window

  13. Click the Default Map View button and click Save.

    You have identified the area that contributes water (and perhaps other things) to the storm drain near Blackman Elementary School.

In this tutorial, you traced where the water collected by a storm drain in Murfreesboro, Tennessee, travels on its way to the ocean. You also created a watershed map to show the area that drains into the storm drain.

Note:

Try repeating these workflows for other storm drains or other places in the environment. Because the data underlying the tools in the tutorial is available nearly worldwide, you can try many locations of interest. Remember that to do the analyses you must create a layer with the location of interest. That can be a single point on a sketch layer or a feature layer. Consider a location near the Chicago River; the river direction was reversed in 1900 and now flows toward the Mississippi River and into the Gulf of Mexico rather than into Lake Michigan.

You can find more tutorials in the tutorial gallery.